SOFT SOLID - 001 Ert Chair Pewter

by Studioutte

Price on demand

Are you a professional? Join our Trade Program now

The ert chair is a geometric seating piece by Studioutte, part of the SOFT SOLID collection, presented here in a full pewter coating developed exclusively for Monde Singulier.

Seven boards compose the entire structure. A slender band wraps the square seat, rising from leg to post to the low half-moon backrest. The form is spare, each board load-bearing and visible. In the spirit of Dutch Neoplasticism, ert reads as a three-dimensional diagram of structural logic.

The pewter coating transforms the wood entirely. The surface is uniform, metallic, the grey sitting somewhere between concrete and raw metal. In certain light conditions, the form reads almost monolithic, closer to cast stone than furniture.

Part of SOFT SOLID by Studioutte, the ert chair in pewter is one of the collection's most direct demonstrations of how material can redefine the perception of a form without altering its geometry.

W 43 x D 54 x H 45 cm

W 16.93 x D 21.26 x H 17.72 in

Materials: Pewter

About
Studioutte

Established in 2020, studioutte is a Milan-based multidisciplinary practice for architecture, interiors and collectible design. The name draws from the German hütte, meaning hut or shelter, a word that carries the spirit of the studio's approach.

Guglielmo Giagnotti and Patrizio Gola founded studioutte around a shared philosophy of warm minimalism: a pursuit of purity through vernacular forms, primitive essence, and poetic restraint. Furniture is conceived as small architectural objects. Their pieces are made from solid wood, raw metal, and occasional polyester lacquer, materials valued for the patina and imperfections that develop with time and use. Production is entirely handcrafted in collaboration with Italian artisans in Padova, Milan, and the wider Lombard region.

Giagnotti studied at the Polytechnic of Bari before joining Studio Librizzi in Milan. In Ghent, he worked alongside Robbrecht en Daem and Dierendonckblancke on public competitions, before a long engagement at Vincent Van Duysen in Antwerp, where he specialized in luxury interiors. Gola trained in interior design at the Politecnico di Milano, worked on retail and set-up projects at DWA, then joined Dimorestudio in 2017 for large-scale hospitality, retail, and residential commissions.

Since founding the studio, Giagnotti and Gola have produced interior architecture and limited-edition collectibles across Europe and New York. The Rootine Wellness Club in Munich (2021), the Industrialism Exhibition at the Urban Zen Center in New York (2022), and the Sala d'Attesa installation at the 2024 Milan Design Week stand among their key projects. The Ert Chair and a dedicated collection for Nilufar Gallery have placed their work in the collectible design conversation. Studioutte was included in the AD 100 list in 2024.

Their collectible editions are available through Monde Singulier.

Learn more
studioutte profil image

Collection

Malta stool by Studioutte - pewter-coated wood, Greek cross base, SOFT SOLID collectionSOFT SOLID by Studioutte, made of Metal and , Pewter version, picture 2

Created for MS

002 Malta Stool Pewter

By Studioutte
Access Pricing
Stele Ceiling Lamp by Studioutte - brushed steel cylinder, cable suspension, SOFT SOLIDSOFT SOLID by Studioutte, made of Brushed Steel and , Brushed Steel version, picture 2

Created for MS

005 Stele Ceiling Lamp

By Studioutte
Access Pricing
Ert Club Armchair by Studioutte - burl wood frame, ivory velvet cushion, SOFT SOLID collectionSOFT SOLID by Studioutte, made of Burl Wood and Plywood, Burl Wood version, picture 5

Created for MS

001 Ert Club Armchair Burl Wood

By Studioutte
Access Pricing
Ert Chair by Studioutte - full pewter coating, half-moon backrest, SOFT SOLID collectionSOFT SOLID by Studioutte, made of Metal and , Pewter version, picture 4

Created for MS

001 Ert Chair Pewter

By Studioutte
Access Pricing
Stele Wall Lamp by Studioutte - brushed steel vertical fixture, two parallel elements, plexiglassSOFT SOLID by Studioutte, made of Brushed Steel and Plexiglass, Brushed Steel version, picture 2

Created for MS

005 Stele Wall Lamp

By Studioutte
Access Pricing
Torre Side Table M by Studioutte - burl wood veneer, stepped column base, square topSOFT SOLID by Studioutte, made of Plywood and Burl Wood, Burl Wood version, picture 3

Created for MS

008 Torre Side Table M

By Studioutte
Access Pricing
Stele Table Lamp L by Studioutte - brushed steel rectangular shade, square base, SOFT SOLIDSOFT SOLID by Studioutte, made of Brushed Steel and Plexiglass, Brushed Steel version, picture 5

Created for MS

005 Stele Table Lamp L

By Studioutte
Access Pricing
Stele Table Lamp M by Studioutte - stacked brushed steel geometry with glass insets, SOFT SOLIDSOFT SOLID by Studioutte, made of Brushed Steel and Plexiglass, Brushed Steel version, picture 5

Created for MS

005 Stele Table Lamp M

By Studioutte
Access Pricing
Osaka Bench by Studioutte - burl wood bench, two parallel planks, chrome steel spacersSOFT SOLID by Studioutte, made of Plywood and Burl Wood, Burl Wood version, picture 3

Created for MS

004 Osaka Bench Burl Wood

By Studioutte
Access Pricing
Torre Side Table L by Studioutte - white marble, geometric column base, SOFT SOLID collectionSOFT SOLID by Studioutte, made of Marble and , Marble version, picture 3

Created for MS

008 Torre Side Table L

By Studioutte
Access Pricing
Ert Chair by Studioutte - glossy gray-brown lacquer, glass panel back, SOFT SOLID collectionSOFT SOLID by Studioutte, made of Wood and , Gray Brown version, picture 4

Created for MS

001 Ert Chair Glossy Lacquered

By Studioutte
Access Pricing
Malta Stool by Studioutte - burl wood side table, Greek cross base, glossy blonde finishSOFT SOLID by Studioutte, made of Plywood and , Burl Wood version, picture 2

Created for MS

002 Malta Stool Burl Wood

By Studioutte
Access Pricing
Ert Padded Chair by Studioutte - pewter coated wood, half-moon backrest, ivory Dedar cushionSOFT SOLID by Studioutte, made of Metal and Plywood, Pewter version, picture 4

Created for MS

001 Ert Padded Chair Pewter

By Studioutte
Access Pricing
Ert Chair by Studioutte - burl wood veneer seat, half-moon backrest, blonde glossy finishSOFT SOLID by Studioutte, made of Plywood and Burl Wood, Burl Wood version, picture 4

Created for MS

001 Ert Chair Burl Wood

By Studioutte
Access Pricing
Ert Padded Chair by Studioutte - pale ochre lacquered wood, half-moon backrest, ivory Dedar cushionSOFT SOLID by Studioutte, made of Wood and , Lacquered version, picture 5

Created for MS

001 Ert Padded Chair Glossy Lacquered

By Studioutte
Access Pricing
Ert Club Armchair by Studioutte - pewter coated wood, half-moon backrest cutout, ivory velvet seatSOFT SOLID by Studioutte, made of Metal and , Pewter version, picture 5

Created for MS

001 Ert Club Armchair Pewter

By Studioutte
Access Pricing
See the collection

Discover more Chairs

ItooRaba Dining Chair by Sizar Alexis – dark stained pine, low blocky backrest and three-support baseSizar Alexis Collection by Sizar Alexis, made of Wood and , Pine version, picture 4

ItooRaba Dining Chair

By Sizar Alexis
2 640,00 €
Calvet Chair in warm oak with carved backrest, splayed legs and perforated seat, Antoni Gaudí by BD BarcelonaCalvet Chair 06

Calvet Chair

By Antoni Gaudí
14 150,00 €
Lupita Dining Chair by OHLA Studio – polished aluminium frame, scalloped backrest, Alcocer collection 2022Alcocer by Ohla Studio, made of Aluminium and , Polished aluminium version, picture 14

Lupita Dining Chair

By Ohla Studio
3 140,00 €
Porto Chair No6 by Project 213A - solid walnut, hourglass base and diamond cutout backrest, carved in Northern PortugalProject 213A Collection by Project 213A, made of Wood and , Walnut version, picture 5

Porto Chair 6

By Project 213A
3 360,00 €
Manhattan Low Chair by Girodroux & Delpy - off-white textile, four flat dark wood panel baseDining Chair, Manhattan Collection, Girodroux Delpy x Monde Singulier 03

Created for MS

Low Chair

By Girodroux & Delpy
Access Pricing
Rectilinear chair with grey fabric cushions and visible metal stud backrest, Drop 03 by Interni Venosta21 SEDIA, Drop 03, Interni Venosta 02

21 SEDIA

By Interni Venosta
7 070,00 €
Porto Chair No1 by Project 213A - solid walnut, circular cutout backrest, arched legs with oval cutoutsProject 213A Collection by Project 213A, made of Wood and , Walnut version, picture 9

Porto Chair 1

By Project 213A
3 360,00 €
Ert Chair by Studioutte - glossy gray-brown lacquer, glass panel back, SOFT SOLID collectionSOFT SOLID by Studioutte, made of Wood and , Gray Brown version, picture 4

Created for MS

001 Ert Chair Glossy Lacquered

By Studioutte
Access Pricing
See all Chairs